News

Often people will treat the rings as an afterthought, putting their resources into the optic rather than the mounting system. However, the mounting system, the physical connection between the optic and the rifle, determines the reliability of the overall optic system. If that connection is unreliable, the benefits of any optic will be compromised. Even a high-quality scope can only perform as consistently as the mounting system allows. Whether you are an avid hunter, air gunner or precision shooter, reliable scope rings are essential for getting rounds on target. UTG Pro P.O.I. 2-Piece Rings are designed with precision machining to provide a reliable connection between an optic and a compatible mounting rail to withstand recoil and continue delivering repeatable zero positioning.

Good rings hold the scope securely, maintain alignment, withstand recoil, and are compatible with the selected rail and optic. The UTG Pro P.O.I. series addresses these needs with precision-machined construction, patented locking plate, guide rods, and integrated recoil-stop design. 

The P.O.I., or Precision Optics Interface series is a higher-end mounting solution designed, engineered, and manufactured by Leapers under its UTG PRO brand. Manufactured in Michigan and offered in various scope tube diameters, mounting systems, and heights. The rings are machined from 6061-T6 aluminum, with the design intended to maintain tight tolerances and a precise interface between the scope, rings, and rail.

Precision-Machined Rings

One of the defining characteristics of UTG Pro P.O.I. rings is their manufacturing approach. Rather than relying on a basic cast or multi-stage construction, the rings are machined from a single piece of 6061-T6 aluminum. This is to maintain a consistent inner diameter and alignment between the ring components and the mounting interface.

6061-T6 aluminum is widely used for applications where strength, weight, corrosion resistance, and machinability are desired. These benefits allow mounting hardware to be rigid without adding unnecessary weight to the rifle.

The P.O.I. rings also feature a hard-anodized matte finish. Besides giving the rings a subdued appearance, an anodized surface provides additional protection for the aluminum against normal wear and environmental exposure.

Two-Piece Design Flexibility

The two-piece configurations allows for independent positioning of the rings along a compatible rail, providing more user flexibility to accommodate different scope lengths and mounting requirements.

A two-piece system can also be useful when access to the receiver or other components is important. The exact advantages depend on the rifle, rail, scope, and intended application, so selecting the correct ring height and tube diameter remains essential.

Recoil-Resistant Locking System

A major feature of the P.O.I. design is its patented locking mechanism. The rings use a low-profile locking plate supported by dual spring-loaded guide rods. The locking system is intended to provide a secure interface with the mounting rail while maintaining a relatively streamlined profile. The rings also incorporate an integrated squared recoil stop. This feature interfaces with the rail slot and is designed to help prevent movement caused by recoil. That is particularly important because even a small shift in the optic or its mounting system can affect Point-of-impact consistency. In addition to weighted drop testing, P.O.I rings are live-fire tested, verified, and rated to handle substantial recoil. 

Available Heights, Scope Diameters and Rail Systems

One of the strengths of the UTG Pro P.O.I. range is the variety of configurations. Choosing the correct version is more important than simply selecting the lowest or highest ring available.  Available in both Picatinny and Dovetail options, there are 14 total configurations featuring the patented locking plate design, premium construction, and rigorous quality test ratings.

Picatinny options are .50 Cal rated come in 1-inch, 30mm and 34mm tube diameters with three center height options; high, medium, low.   The Dovetail options are .30 Cal Springer Air Gun Rated and come in 5 configurations.

UTG PRO POI PICATINNY 2-PIECE RINGS

Product SKU	Tube Size	Center Height
RWU012510	1 inch	Low (0.91in / 23mm)
RWU012515	1 inch	Med (1.1in / 28mm)
RWU012520	1 inch	High (1.3in / 33mm)
RWU013010	30 mm	Low (0.98in / 25mm)
RWU013015	30 mm	Med (1.18in / 30mm)
RWU013022	30 mm	High (1.46in / 37mm)
RWU013408	34mm	Low (0.91in / 23mm)
RWU013415	34mm	Med (1.26in / 32mm)
RWU013420	34mm	High (1.46in / 37mm)

UTG PRO POI DOVETAIL 2-PIECE RINGS

Product SKU	Tube Size	Center Height
RDU012515	1 inch	Med (1.1in / 28mm)
RDU012520	1 inch	High (1.3in / 33mm)
RDU013010	30 mm	Low (0.98in / 25mm)
RDU013015	30 mm	Med (1.18in / 30mm)
RDU013022	30 mm	High (1.46in / 37mm)

  

Installation and Torque Considerations

Proper installation is just as important as the quality of the rings themselves. Scope rings should be installed according to the ring and scope manufacturers' specifications rather than simply tightened as much as possible.

The P.O.I. rings use Torx fasteners, and the manufacturer's specifications should be consulted for the appropriate torque values for the particular model. Using a torque wrench designed for firearm or optic mounting is preferable to estimating tightness by hand.

Over-tightening is counterproductive. Excessive clamping force may damage fasteners, mounting components, or the scope tube. Under-tightening can allow movement. A careful, measured installation is therefore an important part of getting the intended performance from any precision mounting system.

Final Thoughts

If you need uncompromised reassurance that your equipment will perform when you are ready, the UTG Pro P.O.I. 2-Piece Rings are a solid top performer with a patented locking plate with dual spring-loaded guide rods for repeatable zero.

Keep in mind that compatibility remains the most important consideration. Users should verify the scope tube diameter, mounting rail type, objective clearance required height, and manufacturer installation requirements before selecting a specific model.

Leapers brands include UTG Pro, UTG, Integrix and Accushot Pro which offer dozens of patented products and continues to innovate in the optics and optics accessories category to bring the highest quality products to shooting sport enthusiasts.